Apply the cement with a natural bristle, nylon brush or suitable applicator, using a 1/2 inch brush or dauber for nominal pipe size 1/2 inch and less, use a 1 inch brush or dauber for pipe up through 2 inch nominal pipe size, and a brush width at least 1/2 of the pipe diameter on pipe size above 2 inch. Except that on pipe and fittings above 6 inches a 2-1/2 to 3 inch brush should be used. Other applicators may be used provided their use results in an equivalent amount of cement being applied to the pipe and fitting surfaces. |
|
CLICK HERE TO LEARN MORE ABOUT SUGGESTED METHODS OF SOLVENT WELDING PLASTIC PIPE |
|
|
|
CLICK HERE TO RETURN TO THE GENERAL INFO & HELPFUL HINTS INDEX |
